FR
ES
DE
NL
PL
PT
IT
Concentrated Algae Remover & Biocide Treatment – BATI’NET M 3100
BATI’NET M 3100 is a concentrated, multifunctional algae remover designed for professional exterior maintenance. Combining three powerful actions—biocide treatment, cleaning, and Waterrepellent protection—this 3-in-1 formula rapidly eliminates algae, lichens, and other microorganisms from roofs, façades, walls, and outdoor floors.
The integrated detergent booster enhances biocide penetration into the heart of microorganisms, accelerating action and improving cleaning efficiency. It also tackles greasy stains, black marks, soot, and residues from urban and industrial pollution.
Its Waterrepellent effect forms a protective barrier that prevents moisture penetration, reduces fouling, and slows the regrowth of green deposits. BATI’NET M 3100 offers a complete solution for long-term maintenance, cleaning, and protection of exterior surfaces.
- Fast-acting, highly efficient algae remover
- Integrated detergent booster for enhanced biocide treatment
- Cleans grease, soot, black marks, and atmospheric residues
- 2-in-1 practical formula: biocide + Waterrepellent for cost-effective application
- No rinsing required
- Sprayable and easy to apply for professional use
- Safe for all construction materials and application equipment
- Preventive and long-lasting protection against algae and green deposits
- Very low odour, VOC-free
- Concentrated formula: dilute 1 part product to 7 parts water
- Dilute 1 litre of BATI’NET M 3100 with 7 litres of water.
- Apply generously to completely dry surfaces until fully saturated.
- Leave to act. For thick layers of algae or lichens, use mechanical cleaning (stiff brush or low-pressure washer) to assist removal.
The treated surface will start to appear clean within approximately 2 hours. Do not rinse after application.
Main Functions :
- Ultra-concentrated 3-in-1 biocide, water repellent, and cleaner
- Removes algae, lichens, green deposits, greasy stains, and pollution residues
Effectiveness :
- Fast-acting with visible results in just 2 hours
- Preventive action lasting up to 5 years depending on weather conditions
- Integrated detergent booster enhances penetration and performance on stubborn dirt and deposits
Long-Lasting Protection :
- Creates an invisible water-repellent barrier
- Reduces moisture, fouling, and premature aging of surfaces
Application Areas :
- Roofs, facades, walls, and exterior floors
- Suitable for renovation and maintenance work
- Compatible with: tiles, slates, bricks, stones, coatings, concrete, wood, plaster, and RPE surfaces
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
Ultra-Fast Gel Paint Remover for Façades – SCALPEX® SD+
SCALPEX® SD+ is an ultra-fast gel paint stripper designed to efficiently remove paints, waterproofing systems, thin RPE coatings, and graffiti from a wide range of exterior surfaces, including render, concrete, stone, brick, wood, and mineral substrates.
Thanks to its innovative “flash effect” formula, it softens coatings in just 15–60 minutes depending on thickness. Ready to use, this gel paint remover is simple to apply with a brush or airless sprayer. Odourless and DCM-free, SCALPEX® SD+ is ideal for rapid, high-performance stripping on vertical façades and exterior walls.
No-Rinse Paint Stripper for Wood – SCALPEX® NW NG
Concrete Cleaner & Cement Residue Remover – SCALP SOL’NET
SCALP SOL’NET is a concentrated professional concrete cleaner formulated to remove cement films, laitance, efflorescence and post-construction residues from a wide range of hard surfaces. Designed for demanding cleaning and surface preparation tasks, it rapidly dissolves cement deposits, plaster residue, limescale and salt-based contamination.
Ideal for post-tiling operations and construction site clean-up, this powerful solution eliminates hardened cement build-up — even after several days — restoring surfaces to a clean, ready-to-finish condition.
As a highly effective concrete floor cleaner, SCALP SOL’NET is particularly suitable for preparing floors before coating, painting or sealing, ensuring optimal adhesion and long-lasting results.
Recommended applications include:
- Removal of cement laitance after grouting tiles or slabs
- Cleaning cement films from tiles, ceramics, bricks and concrete blocks
- Elimination of efflorescence and salt deposits
- Degreasing and preparation of concrete surfaces
Professional Limestone & Stone Façade Cleaner – SCALP DMC 73
Self-Cleaning Photocatalytic Coating – SCALP SOLAR ACTIV
SCALP SOLAR ACTIV’ is an innovative, eco-friendly photocatalytic coating designed to transform exterior surface maintenance. Using sunlight, its UV-activated technology breaks down organic and biological dirt, keeping walls, facades, and other surfaces cleaner for longer.
The invisible, breathable film preserves the natural appearance of substrates while actively preventing micro-organism growth, including algae, moss, lichen, and more. By limiting surface soiling, SCALP SOLAR ACTIV’ reduces the need for frequent cleaning, saving time, water, and effort, while cutting down the use of harsh cleaning chemicals.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
